TENMAT introduces new 1 Hour Fire Rated LED Downlight Cover

FF109 Fire Rated LED Light Cover

TENMAT is excited to introduce the FF109 Fire Rated LED Downlight Covers, the only flexible 1 hour fire barrier for low profile recessed light fixtures on the market. The TENMAT FF109  Fire Rated LED Downlight Covers are cone-shaped intumescent enclosures which have been specifically designed to help maintain the integrity of openings of up to 6” diameter in fire rated ceilings when penetrated by modern low profile LED downlight fixtures.

The ultra-flexible nature of the material allows the cover to get rolled up for easy retrofit, remodel or new construction installation from below the ceiling to protect modern low profile LED light fixture and provide a 60 minute flame, smoke and heat barrier.

The FF109 Low-Profile LED Recessed Light Covers are suitable for most low profile LED lights, ultra-thin wafer LED recessed lights, LED recessed retrofit downlights, LED recessed ceiling light and recessed spotlight remodel kits installed in fire-resistance rated floor/ceiling or roof/ceiling assemblies (attic spaces).

The unique design gives the architect, specifier and installer more freedom in fixture selection as the covers are suited to a wide range of LED models and types.

Benefits of TENMAT’s Fire Rated LED Downlight Protection Covers include:

• 1 Hour Fire Tested
• Only fire tested solution for retrofit applications
• Easy Installation – can be fitted in seconds – no screws, drilling or additional sealant required
• Ultra flexible (Ideal for remodel and retrofit applications)
• Fits most 4” and 6” low profile LED downlight fixtures
• Significant Labor savings
• Lightweight
• Flexible material enables the cover to be fitted around obstructions or retro-fitted
• Vent hole on top of the cover reduces the risk of over-heating of the light in normal use
• In a fire, the intumescent material expands 5 times of its original thickness, closing the vent hole and preventing flame spread
• Easy to remove and re-install for light fixture maintenance
• Enhances the acoustic protection of the ceiling
• Maintenance free
• 60-minute fire protection

The cones come ready-to-use and can be fitted with little or no skills and without special tools. Once in place the covers do not require any additional maintenance and are unaffected by moisture.

TENMAT Recessed Light Covers are used in thousands of applications throughout the entire United States and Canada; from small apartments, over single-family homes to multifamily dwellings, college dormitories, hospitals, assisted-living facilities, hotels and office buildings.

For more information about  TENMAT’s new 1 Hour Fire Rated LED Downlight Covers, please visit https://www.tenmatusa.com/fire-rated-light-enclosures/ff109-250-1-hour-fire-rated-led-downlight-cover/

TENMAT introduces new LED Downlight Cover for Retrofit LED Lights

TENMAT is excited to introduce the FF130R LED Downlight Cover, the only flexible thermal barrier for retrofit low profile recessed light fixtures on the market. The TENMAT FF130R LED Downlight Cover has been specifically developed to keep insulation from low profile LED recessed lights in retrofitting applications.

The ultra flexible nature of the material allows the cover to get rolled up for easy retrofit, remodel or new construction installation from below the ceiling to protect modern low profile LED light fixture from insulation and to stop unwanted airleakage through the light fixture.

TENMAT LED Downlight Covers are made out of fire safe mineral wool and can be used with a broad range of low profile LED recessed light models and manufacturers.

The cone-shaped design ensures that the insulation is kept at a safe distance away from the light, preventing combustible materials, such as blown-in cellulose, low density foam, lay-in insulation or sprayed foam insulation to come in contact with the hot light.

Benefits of TENMAT LED Downlight Protection Covers include:

• Thermally tested according to UL 1598 for usage with IC and non-IC rated low profile LED recessed lights
• Fire tested in accordance with IEC 60598-1
• Ultra flexible (Ideal for remodel and retrofit applications)
• Lightweight (approx. 7 oz.)
• Keeps flammable insulation at a safe distance from hot recessed lights
• Compatible with sprayed foam insulation, low density foam, blown-in insulation and lay-in insulation
• Saves energy by eliminating draft through your recessed light fixture
• Easy to fit
• Ideal for a wide range of low profile LED lights in commercial and residential buildings

In addition to its safety function, the cover can be used as a stand-alone product to reduce energy loss through the thin recessed light, stop airleakage and cold air entering the living space. TENMAT covers exhibit outstanding acoustic insulating properties, which reduces the noise transmission to and from the living area.

Current customers value the product’s easy way of installation and the resulting cost savings. The cones come ready-to-use and can be fitted with little or no skills and without special tools. Once in place the covers do not require any additional maintenance and are unaffected by moisture.

TENMAT Recessed Light Covers are used in thousands of applications throughout the entire United States and Canada; from small apartments, over single-family homes to college dormitories, hospitals, assisted-living facilities, hotels and office buildings.

For more information about  TENMAT’s new LED Downlight Cover for Retrofit Lights, please visit www.tenmatusa.com/insulation-protection-covers/ff130r-led-recessed-downlight-protection-cover/