Resolving the “Cavity” between the East and West Coast.

Learn more about the blooming partnership of the US’s leading passive fire protection manufacturer and the Northwest’s top exterior technologies expert.

Exterior Cladding. Aluminum Panels. Rainscreen Systems. Façades. Recently, these terms have become popular in construction conversation, regardless of if you reside in the skyscrapers of Manhattan or the earthy, modern terrain of the Pacific Northwest’s cities. With its strong correlation to energy conservation and recently adopted energy codes, exterior cladding systems have been an attractive choice for construction development in cities, like NYC and Seattle.

But there’s one recurring issue in developing new façade-based structures – finding a fire-rated solution to accommodate stringent building regulations, life safety measures, and the benefits of energy efficiency. One of the most critical life safety hazards of a façade application is the interior cavity, designed to allow ventilation and energy efficiency, acts like an open chimney, in the unfortunate event of a fire. The void allows the fire to spread at an accelerated pace throughout the rest of the building – endangering lives and property. As a result, a variety of fireblocking solutions have been developed to reinforce this life safety hazard – however, when these solutions are implemented, they block off a majority of the cavity which greatly depreciates the level of energy efficiency, air circulation, and water drainage.

So, the question is “When there is no fire, why should the cavity be blocked”? In response, Tenmat has developed a variety of fireblocking solutions, which have been designed to enable the maintenance of an open ventilated cavity, preserve the energy conservation and building science benefits associated with cladding systems, while concurrently serving as a formidable fire barrier in the event of a building fire.

Here at Tenmat, we specialize in the development and manufacturing of intumescent technology – allowing us to meet the demands of construction professionals, based on application, thicknesses, shape, expansion rate and char formation after heat interaction. An intumescent is a material which reacts and expands aggressively when exposed to heat. In addition, this technology is designed to react and expand to fill all the gaps and changes in an opening, and therefore, can maintain a high-performance fire barrier for an extended duration. With this type of technology, it allows the construction application to shape a fireblocking solution to accommodate its demands rather than the opposing. Furthermore, Tenmat has worked closely with ventilated rainscreen professionals and building code officials to develop the optimal intumescent-composed fireblocking solutions for façade application.

Composed with a rigid, high expansion intumescent, Tenmat’s FF102/50 Intumescent Fire Block are used as fire blocks at slab lines, fire blocks around windows and as fire blocks at changes in occupancy (horizontally and/or vertically) and for larger openings, Tenmat’s VFB+ Ventilated Fire Barrier is composed of a high expansion intumescent seal fixed to TENMAT High Density Mineral Wool. Both of these intumescent solutions are designed to maintain the open, ventilated cavity in normal conditions, but will expand to seal off the cavity gap when exposed to heat. Therefore, the FF102/50 Intumescent Fire Block and the VFB+ Rainscreen Fireblock allow construction professionals to receive the full benefits of façade systems, while maintaining the appropriate level of life safety, in the event of a fire.

About Facades Northwest:

Facades Northwest is an architectural product representative, specializing in exterior technologies. Based in the Pacific Northwest, their primary business focus is to assist Architects, General Contractors and Owners in finding the right product and designing an exterior facade for their projects.

Facades Northwest partners with worldwide producers of building systems, leveraging the strength of each producer, for superior building envelope protection. As a part of the work they do, they provide value engineering, competitive alternatives and market leading technologies. Most importantly, they align multiple trades for specialization and time effective construction.

Specialties Include:
  • Phenolic Cladding
  • Rainscreen Façade Fiber Cement
  • Aluminum Panels
  • Weather Resistant Barriers
  • Structural Insulated Sheathing
  • Thermally Broken Subframing
  • Digitally Printed Aluminum Cladding
  • Sintered Stone Cladding
  • Stone Wool Insulation
  • Louvers and Sun Shades

Tenmat and ALUCOBOND® Partner on Fire-Rated Blocks for Cladding Systems

Expanding intumescent technology prevents flames from spreading through ventilated cavities

Wilmington, DE – June 9, 2023 – In response to the adoption of the 2022 Building Code by New York City, Tenmat, a leading manufacturer of advanced firestopping materials and solutions, has partnered with 3A Composites USA, the global manufacturer of ALUCOBOND® PLUS 4mm aluminum composite material (ACM) to conduct a joint NFPA 285 fire test.

Together, the companies performed a groundbreaking NFPA 285 fire test at Intertek Laboratories, leveraging the expertise of Tenmat’s FF102/50 fire block and highly regarded ALUCOBOND to meet the rigorous new regulations of the building code.

The newly adopted code requires fire blocking within rainscreen assemblies, if combustible materials are used within the wall assembly.  With testing complete, the architectural community has more cladding options to choose from without increasing assembly costs.  For decades, ALUCOBOND has been a dominant cladding of choice around the world due to its formability and flatness allowing custom facades and freedom of design. “We are excited to provide a constructible and cost-effective solution that allows the architectural community to continue using ALUCOBOND to bring their vision to life.”, stated Nick Scheib, general manager at 3A Composites.  “This joint effort between Tenmat and 3A Composites represents our commitment in providing solutions for the marketplace.”

In response, Tenmat has developed a quick acting intumescent fire block for ventilated rainscreen and cladding systems, the FF102/50. The innovative FF102/50 fire blocks are designed to allow the practical benefits of cladding systems, such as energy conservation, air circulation, and moisture dissipation, while meeting the new code requirements.

Tenmat’s FF102/50 employs state-of-the-art intumescent technology that expands 25 times its original thickness when exposed to fire, effectively counteracting the adverse consequences of the concealed space behind the cladding.

 

Minutes to Install, Permanent Peace of Mind

This successful NFPA285 test is one of the first of its kind to be specifically designed and installed in accordance with the new stringent requirements of the 2022 New York City Building Code. The FF102/50 fire block was expertly deployed around window openings and at all slab lines, meticulously adhering to the position requirements for fire blocking material in the updated building code. Under normal conditions, Tenmat’s rigid and highly expansive intumescent fire block enables the maintenance of an open ventilated cavity, preserving the energy conservation and building science benefits associated with cladding systems, while concurrently serving as a formidable fire barrier in the event of a building fire. With the successful completion of the NFPA 285 test, validating the performance of Tenmat’s FF102/50 and 3A Composites’ 4mm fire retardant ALUCOBOND® PLUS both companies are and envision a construction landscape in New York City where passive fire protection standards are enhanced.

About Tenmat

For over 100 years, Tenmat has been a leader in the development, engineering and manufacturing of intumescent materials that offer advanced passive fire protection and fire blocking capabilities.

Tenmat offers a unique range of flexible, lightweight, and ready-to-use products and solutions for the most demanding firestopping applications. Our state-of-the-art, in-house R&D Laboratory and ISO 9001:2015 accredited production facilities have been developing and manufacturing technically superior passive fire protection products and intumescent materials for over 100 years. All Tenmat products have been fire tested by independent third-party labs such as UL and Intertek. 

Tenmat USA is headquartered in Wilmington, DE. For further information about Tenmat and our line of innovative firestopping materials and solutions, please call 1-800-821-3436, email info@tenmatusa.com or visit www.tenmatusa.com.

 

About 3A Composites

3A Composites is a leading producer of materials for the metal facades market. Since 1969, the company has been developing, manufacturing and marketing high-quality aluminum composite panels, structural composite material, plastic sheets and lightweight foam boards for the architecture, visual communication and transport and commercial building industries.

3A Composites is part of the international 3A Composites Group, which belongs to the listed company Schweiter Technologies headquartered in Horgen, Switzerland. Visit https://www.3acomposites.com for details.

The 3A Composites USA headquarters are located in Davidson, N.C.  U.S.-based manufacturing facilities are located in Benton, KY, where they produce ALUCOBOND, used in the architectural and building cladding industries for over 50 years. For more information about ALUCOBOND PLUS, ALUCOBOND AXCENT, and ALUCOBOND EasyFix call 1-800-626-3365, email info.usa@3AComposites.com or visit www.alucobondUSA.com.