Designed to Protect.

Discover how passive fire protection for LED downlights plays a key role in protecting our communities.

Where It Begins.

Energy efficiency, aesthetics, and increased life longevity are some of the key reasons why LED wafer downlights have been setting the lighting standards in modern construction practices. From constructing new Type V-A multifamily complexes to upgrading the current lighting system in a boutique hotel, LED downlights have the ability to offer easy installation for contractors, and the aesthetics for architects and developers – the ultimate combo. In addition to the previously mentioned applications, LED downlights can often be found in the following applications:

  • Commercial Spaces: Includes shopping malls, mixed-use buildings, local boutiques.
  • Residential Buildings: Includes multi-family complexes, student housing.
  • Hospitality Spaces: Includes hotels, motels, lodges, inns.

 

With its ability to be installed in renovation jobs and new construction projects, it is critical to ensure that our current and future communities are fully protected from life safety hazards, such as unprotected ceiling openings.

Look up at your ceiling. It’s important.

Frequently, unprotected ceiling openings are one of the most common life safety hazards found in modern construction applications. When a fire-rated ceiling assembly is penetrated by a recessed fixture, such as a LED wafer, the integrity of the ceiling is compromised. In the event of a fire outbreak, the recessed fixtures disintegrate after several minutes, allowing a clear pathway for smoke and flames to maneuver to the next level of an infrastructure.
As a result, the International Code Council has established a building code requirement to ensure that this life safety hazard is properly resolved within our communities. For reference, Section 714.5.2 of the 2021 IBC states:

“Where floor/ceiling assemblies are quired to have a fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced.”

In addition, it is essential to point out that LED wafers are being installed in both existing infrastructures and new construction. Therefore, it is critical to ensure that the unprotected ceiling openings are properly fire-rated, no matter if the infrastructure is previously existing or currently being built.

Exploring Your Options.

As the popularity of LED downlights reaches new heights in modern construction, it was critical that a proper fire-rated solution was developed. One of the recent trending solutions are “fire-rated” lights. These solutions are budget-friendly and offer quick, easy installation for on-site contractors. However, a huge misconception about these solutions is because they are composed of metal – they automatically have a fire-resistance rating for applications where fire-resistance rated assemblies are required. However, this is a false assumption. Even though metal itself offers some firestopping properties – it is a poor insulator and does not mean that a metal-based solution qualifies as a fire-rated solution. In order for any solution to claim they are fire-rated, it needs to be tested and approved by a third-party laboratory.

Another method of properly firestopping a LED “pancake” light is fire-rated drywall boxes. This firestopping method is where gypsum wallboards surround the LED wafers; however, there are several cons of this practice. Fire-rated drywall boxes are known to be associated with high labor savings, which can increase the cost of installation beyond budget limits. One of the main causes for high installation costs is this solution’s inability to be retrofitted into a pre-existing ceiling – meaning the pre-existing ceiling would need to be deconstructed prior to the installation of these solutions. In addition to its high labor costs, fire-rated boxes are not properly fire tested and certified – which defeats the purpose of installing proper passive fire protection measures.

Spec the Best, Specify Tenmat.

Now, all of the previously listed solutions don’t exactly check off all the boxes – so, the pressing question is “Are there any solutions that can check off all the preferred features of a firestopping solution?”. To answer your question, let us introduce you to – Tenmat’s FF109-200 and FF109-250, 1 Hour Fire Rated LED Downlight Covers. Composed with the latest intumescent technology, the FF109-200 and 250 are able to stop heat and flames from spreading to other parts of a building for up to 60 minutes. In addition, ALL of Tenmat’s Firestopping Solutions and Materials are tested through third-party laboratories, UL and Intertek and all certifications can be found on our website.. In addition to its firestopping components, the ultra-flexible nature of the intumescent material allows the cover(s) to get rolled up for easy retrofit, remodel, or new construction installations – ideal for a multitude of construction practices. To learn more about these optimal solutions, please visit the FF109-200 and FF109-350 product pages.

End Notes.

Incorporating passive fire protection measures is crucial for the safety of our communities, both in the present and future. LED downlight fixtures are very popular in modern-day construction, but without proper fire-rated solutions, they pose a great threat to our communities. By specifying solutions, such as Tenmat’s FF109-200 and 250, it is ensured that a building’s ceiling openings are protected – allowing for a fire-resistance rated ceiling’s integrity to be foolproof. If this article didn’t answer all of your questions and concerns, please feel free to contact one of our on-site specialists at +1-800-821-3435 or email us at info@tenmatusa.com.

Don’t Leave Any Question Unanswered.

Learn More About the Ins and Outs of Passive Fire Protection in the Vast Spectrum of Construction Applications.

In today’s construction landscape, construction professionals are constantly experiencing building code adoptions. One of the key reasons for the consistency in building code updates is the advocacy for up-to-date life safety measures for traditional and modern construction applications. Therefore, the use of passive fire protection has become quite popular on active construction sites and new construction infrastructures; however, there are still questions surrounding this form of life hazard. Here at Tenmat, we understand the monetary costs of a failed building inspection and the liability of installing a falsified fire-rated solution. In this blog, we will be answering some of the most important and frequently asked questions regarding passive fire protection. Well, there’s no time to waste when it comes to safety – let’s get started!

“I just failed a building inspection. The electrical inspector stated that my fire-resistance rated ceilings have been compromised, due to installation of recessed can lights. Why is my ceiling compromised? What building codes are associated with this situation? Are there any available solutions?”

Municipalities across the United States – through adoption of the International Building Code – require fire-resistance-rated ceilings for certain commercial, industrial, institutional, residential, and other occupancies buildings. When a fire-resistance rated ceiling assembly is penetrated by a fixture, such as recessed can light, LED downlight, or troffer luminaire, the ceiling is now compromised. The reason being is when there is a fire outbreak, the flames and heat disintegrate the fixture within several minutes. Once the fixture is non-existent, the ceiling opening no longer works as a barrier to protect flames, heat, and smoke from traveling throughout the rest of the building. As a result, building code professionals have established a requirement for these unprotected ceiling openings. For reference, in section 714.5.2 of the 2021 IBC: “Where floor/ceiling assemblies are required to have a fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced.” To resolve this issue, there are various passive fire protection solutions that accommodate to these life safety hazards, which we will learn more about in this blog.

“I am specifying passive fire protection solutions in a new-construction multifamily complex. I saw various forms of passive fire protection solutions; but I know not all solutions are properly fire-tested. How do I know which solutions are properly fire-tested?”

One of the simplest ways to confirm that a solution is properly fire tested is to visit the manufacturer’s website, and review the solution’s listing, test report, or certification. If you are unable to locate the certification or questioning the authenticity of the certification, you can visit one of the national and international acclaimed independent third-party testing laboratories, such as Underwriter Laboratories (UL) or Intertek, and verify the solution’s testing. If you are unable to find the proper certification, the “fire-rated solution” is not properly fire tested.

“Currently, I am looking for a non-standard passive fire protection solution. How do I accommodate this life safety hazard with the correct passive fire protection solution?”

With the rapid growth of modern construction practices, new life safety hazards spring up on a regular basis. In response, passive fire protection manufacturers are expected to formulate the proper solutions for these hazards; however, modern construction practices are accelerating more rapidly than the evolution of passive fire protection solutions. Here at Tenmat, we understand that all life safety hazards need to be fitted with the proper solution. With our on-site research and development team, we have the accessibility to work one-on-one with construction and building professionals to develop non-standard passive fire protection solutions and test them. Sounds like a current problem you are facing? Contact us at +1-800-821-3436 to learn more about the opportunities Tenmat has to offer you and your team.

“When exploring for passive fire protection solutions, I came across a variety of fire-rated materials. What are the differences between intumescent, mineral wool, fire-rated drywall, and metal solutions?”

With the growing demand for passive fire protection solutions, the availability of different fire-rated materials has significantly increased. One of the traditional firestopping materials is “fire-resistant” gypsum wallboard. This material tends to result in a highly labor-intensive installation, which may increase the cost of installation beyond budget limits. Another commonly used material is metal; however, metal is not very flexible, in terms of aesthetic and product variations. In addition to its lack of flexibility, metal is also known to be a poor insulator and will not sufficiently stop the fire’s heat transfer. In contrast, mineral wool and intumescent are known to be ideal for firestopping applications, due to their flexible nature and their adaptability to produce various forms of firestopping solutions.

Even though the above materials are associated with firestopping capabilities, it DOES NOT mean that the final product offers the same level of firestopping. Therefore, it is critical to review the manufacturer’s testing certification to verify that a solution is properly fire tested.

“I know unprotected ceiling openings caused by recessed lights need to be properly fire-rated. But, what about other recessed fixtures, such as in-ceiling loudspeakers?”

Yes, in-ceiling loudspeakers need to be properly fire-rated in fire-resistance rated ceiling/floor assemblies. In addition to the 2021 IBC Section 714.5.2, the 2017 NEC (National Electrical Code) requires in Section 640.25, “Loudspeakers installed in a fire-resistance rated partition, wall or ceiling shall be listed in an enclosure or recess that maintains the fire resistance rating”. Even though this life safety hazard has been present for several years, there are very few optimal solutions to rectify this hazard. As a direct response to this building code, Tenmat has formulated the optimal fire-rated solution, the FF109-FRSC, a 1 Hour Fire-Rated Speaker Cover. Composed with the latest intumescent technology, the FF109-FRSC has the ability to contain flames, smoke, and heat for 60 minutes – allowing additional time for evacuation of the blazed structure. As an added bonus, the sound absorbing properties of the proprietary intumescent material enhances the acoustic performance and protection of the installed loudspeaker. Learn more about the key benefits of installing Tenmat’s FF109-FRSC by visiting this website.

“I noticed that there a variety of passive fire protection solutions on the market. What are the advantages and disadvantages of each variation of fire-rated solutions?”

There are several different solutions for fire-resistance rated ceiling membrane applications with a diverse range of prices, approvals from third-party testing facilities, and product designs. One of the recent trending solutions are “fire-rated” lights. These solutions are budget-friendly and offer quick, easy installation for on-site contractors. However, a huge misconception about these solutions is because they are composed of metal – they are UL-classified and are suitable for applications where fire-resistance is required. However, this is false. Even though, metal itself, offers some firestopping properties – it is a poor insulator and does not mean that a metal-based solution qualifies as a fire-rated solution. In order for any solution to claim they are fire-rated, it needs to be tested and approved by a third-party laboratory.

One of the more traditional firestopping methods is fire-rated drywall boxes. This firestopping method is where gypsum wallboard surrounds the recessed fixtures; however, there are several cons of this practice. Dry-wall boxes are known to be very labor intensive and may increase the cost of installation beyond budget limits, in addition to possibly not having a proper fire-resistance rating.

Finally, a popular intumescent firestopping solution, which is properly fire-tested by a third-party laboratory (UL and Intertek), are Tenmat’s Fire-Rated Enclosures for in-ceiling fixtures. Tenmat covers are suitable for recessed can lights, LED downlights, troffer luminaires, and in-ceiling loudspeakers – applicable to various sizes and systems. Tenmat Fire Rated Speaker Covers are used in various applications throughout the entire United States and Canada; from multi-residential homes to retail spaces, hospitals, and assisted-living homes. To learn more about Fire Rated Covers, please visit https://www.tenmatusa.com/.

Today, we covered a majority of the most frequently asked questions regarding passive fire protection solutions and their role in the evolving construction landscape. However, we aren’t learning if no additional questions arise. If we didn’t answer your questions today, please feel free to contact one of our on-site specialists at +1 (800) 821-3436 or email us at info@tenmatusa.com.

Beyond Books: A Lesson in Safety – Unveiling the Significance of Passive Fire Protection in Educational Environments.

Exploring the Vital Applications and Measures to Ensure Life Safety in K12 Schools, Colleges, and Universities is Met.

Fires in Focus: The Critical Demand for Passive Fire Protection in Educational Facilities

In the ever-expanding landscape of educational institutions, ensuring the safety of students, professors, administration, and additional staff is crucial. Whether you are renovating lighting fixtures in elementary schools or constructing a new dormitory for an expanding university campus, it is prominent to ensure passive fire protection measures are properly implemented to protect the lives and property within the “incubators” of our current and future generations.

Beyond the Flames: Demystifying Passive Fire Protection

Passive fire protection is a comprehensive defense strategy vital to securing educational structures from the devasting consequences of fire outbreaks. Unlike active fire protection systems that require human intervention, passive measures are inherently built into the architecture to automatically respond in the event of a fire. These measures include the incorporation of fire-resistant materials, specialized doors, and enclosures designed to contain and slow down flame and smoke progression. Therefore, passive fire protection acts as a proactive solution rather than reactive solutions – which caters to the critical element of time.

One of the primary and most profound significances of passive fire protection is its capacity to save lives. In the unfortunate event of a fire outbreak, these measures form a crucial barrier, impeding the progression of flames and smoke. This containment not only prevents the rapid escalation of the fire but also provides additional time for the execution of evacuation procedures. In educational settings, where the safety of students and staff is paramount, these vital moments can make a life-altering difference. In the chaotic atmosphere of a fire, every second counts, underscoring the imperative role that passive fire protection plays in enhancing the overall safety and resilience of educational environments.

Guardians of Learning: Identifying Key Areas for Passive Fire Protection

One of the primary contributors to the rapid expansion of a fire outbreak lies in unprotected ceiling openings, particularly those caused by recessed light fixtures in fire-resistance rated ceiling/floor assemblies. These openings create avenues for the swift dissemination of flames and smoke throughout the structure, posing a serious threat to the safety of its occupants. The implementation of passive fire protection solutions is crucial in mitigating this risk. A fire-rated enclosure, designed with materials like fire-rated drywall, mineral wool, or intumescent technology, acts as a safeguard by compartmentalizing the smoke and flames.

In addition to the vulnerability posed by unprotected ceiling openings from recessed light fixtures, in-ceiling loudspeakers also contribute to the rapid spread of fire outbreaks. Given the essential role of Public Address (PA) systems in large facilities like K12 schools and university learning centers, in-ceiling loudspeakers are prevalent in academic buildings. However, the integration of audio-visual (A/V) technology introduces additional pathways for flames, heat, and smoke to traverse. Therefore, it becomes imperative to install passive fire protection solutions in these applications to fortify the fire resilience of such structures.

Apart from the risk associated with unprotected ceiling openings from recessed lights and in-ceiling loudspeakers in fire-rated ceiling/floor assemblies, another concern arises from through-penetration openings caused by cables and wires. These openings create potential channels for the uncontrolled passenger of fire, compromising the integrity of firestopping barriers. To address this hazard, the installation of passive fire protection measures, including fire-rated plugs, blocks, foams, and sealants designed to stop flames and smoke, is becoming crucial. These solutions eliminate the smallest of pathways for flames and smoke, allowing for occupants to have a larger time frame to occupants.

In the Lab and Beyond: Cutting-Edge Technologies in Passive Fire Protection

As the demand for passive fire protection in educational settings rises, a multitude of passive fire protection solutions have entered the market. Some of these solutions include:

Fire-Rated Enclosures:

Passive fire protection solutions, such as fire-rated enclosures, are widely employed for safeguarding unprotected ceiling openings. While available in diverse sizes and compositions like mineral wool or intumescent material, a drawback lies in their limited adaptability. Many of these solutions lack the flexibility for easy installation, making them less accommodating for various lighting fixtures and in-ceiling loudspeakers, irrespective of model or manufacturer.

Fire-Rated Drywall Boxes:

Initially a cornerstone of passive fire protection, fire-rated drywall boxes face challenges due to labor-intensive installation processes and high associated costs. This traditional approach, while effective, is deemed less practical by many architects and contractors who seek more efficient and budget-friendly alternatives.

Fire-Rated Lights

Despite technological advancements, fire-rated lights have entered the passive fire protection market with some reservations. The intricacies in installation and maintenance present challenges for architects and contractors. Moreover, the limited aesthetic options of fire-rated lights may not align with the design preferences of new-construction educational facilities, potentially posing a drawback in their widespread adoption.

Intumscent Technology

Intumescent technology emerges as a versatile solution for fire-rating unprotected ceiling openings and through-penetration applications. With its adaptable, lightweight composition and added audio protection properties, intumescent technology stands out as a universal and efficient choice for a wide range of passive fire protection applications.

In addition to all of these available solutions is IMPORTANT to ensure they are fire tested and approved by a trusted third-party laboratory such as UL Solutions. To further learn about the importance of fire tested and approved passive fire protection solutions, please visit The Influence of Recessed Luminaires in Fire Resistive Assemblies | UL Solutions.

Smart Choices, Safer Spaces: Finding the All-In-One Passive Fire Protection Solution for Educational Facilities.

Here at Tenmat, our research and development team are dedicated to facing the opposing challenges of passive fire protection in education applications. All of our passive fire protection solutions are designed with the latest intumescent technology and have been fire tested by independent third-party labs such as UL and Intertek. Here are some of the key applications for educational facilities:

If Tenmat’s pre-designed solutions do not align with your application’s demands, we offer a full range of manufacturing capabilities – allowing for customizable intumescent solutions. Please reach out to one of Tenmat’s team members at +1-800-821-3436 for further assistance.

A Secure Future: Crafting a Blueprint for Passive Fire Protection in Education

In conclusion, the imperative demand for passive fire protection in educational facilities underscores the need for innovative solutions to ensure the safety of students, faculty, and infrastructure. The multifaceted challenges posed by unprotected ceiling openings, in-ceiling loudspeakers, and through-penetration openings necessitate comprehensive strategies for fire resilience. While various solutions exist in the market, Tenmat emerges as a standout provider, offering a range of fire-tested and approved products designed with cutting-edge intumescent technology. From fire-rated troffer covers to customizable intumescent solutions, Tenmat’s commitment to research and development reflects a dedication to meeting the evolving needs of educational environments, providing smart choices for creating safer spaces. For those navigating the critical landscape of passive fire protection, Tenmat stands as a reliable partner, offering a suite of solutions meticulously designed to address the unique challenges of educational structures.

Let’s Get Active About Acoustical and Passive Fire Protection

Tenmat launches new dedicated website for the FF109-FRSC, 1 Hour Fire Rated Speaker Cover

Tenmat is thrilled to announce the official launch of our dedicated website for the FF109-FRSC, 1 Hour Fire Rated Speaker Cover. As the newest addition to Tenmat’s range of passive fire protection solutions, this website aims to showcase the cutting-edge intumescent technology and exceptional acoustical protection properties of our latest fire-rated solution.

Our newly unveiled website serves as a comprehensive resource, providing visitors with a comprehensive overview of the FF109-FRSC. You will find detailed information about the product, including its features, installation guidelines, and answers to frequently asked questions. We have carefully designed the website to offer an intuitive and user-friendly platform, enabling easy navigation for ordering and accessing additional support.

At Tenmat, we are proud to offer the FF109-FRSC as a solution that seamlessly combines top-notch fire protection, superior acoustical performance, and retrofitting capabilities. Whether you are upgrading your home theater or embarking on a new commercial construction project, the FF109-FRSC is the ideal choice for ensuring life safety and optimal acoustical protection.

We invite you to visit our new FF109-FRSC website at www.speakerprotectioncover.com and embark on a virtual tour. Explore the full potential of installing this innovative solution in your next construction project and witness firsthand the benefits it brings to fire safety and sound quality.

With the launch of our dedicated FF109-FRSC website, we are excited to provide you with an in-depth understanding of our state-of-the-art fire-rated speaker cover. Discover the power of our advanced intumescent technology, remarkable acoustical protection, and ease of retrofitting. Take the first step towards enhancing life safety and acoustic performance by visiting our website today at www.speakerprotectioncover.com..

Tenmat Joins RAiNA: Building a Stronger Future for Rainscreen Technology

Tenmat becomes a member of the RAiNA, the leading authority on rainscreen design and construction

Tenmat, a leading manufacturer of advanced intumescent fire block solutions for ventilated rainscreen systems, is excited to announce its membership in the Rainscreen Association of North America (RAiNA).

Modern constructions often require external cladding and rain screens be held away from the building structure to allow ventilation and improve the building energy efficiency. This resulting cavity creates a serious fire protection threat to structures and people. The void can act as an open chimney and allows the fire to spread quicky around the building. Modern building codes, such as the 2022 New York City Building Code, have identified this issue and are now requiring fireblocking in these concealed draft openings behind the cladding.

In response, Tenmat has developed a quick acting intumescent fire block for ventilated rainscreen and cladding systems, the FF102/50. The Innovative FF102/50 Fire Blocks were designed to allow the benefits of the practice of cladding systems, such as energy conservation, air circulation, and moisture dissipation; however, eliminating the “chimney effect”.

In recent events, Tenmat’s FF102/50 had successfully passed the NFPA285 test. The FF102/50 fire block was expertly deployed around window openings and at all slab lines, meticulously adhering to the position requirements for fireblocking material in the updated building code. Under normal conditions, Tenmat’s rigid and highly expansive intumescent fire block enables the maintenance of an open ventilated cavity, preserving the energy conservation and building science benefits associated with cladding systems, while concurrently serving as a formidable fire barrier in the event of a building fire.

With joining the Rainscreen Association of North America, Tenmat is enthusiastic to educate other fellow members of this fire hazard in rainscreen systems and the potential solutions to help protect lives and property, in the unfortunate event of a fire.

Tenmat is Shining Bright in the Music City!

Tenmat announces partnership with lighting representative, Tennessee Lighting Sales

Tenmat is thrilled to announce our partnership with Tennessee Lighting Sales in Tennessee.

Tennessee Lighting Sales, located in Nashville, is “Middle Tennessee’s leading manufacturers’ representative for commercial, industrial, and residential lighting”. With the addition of Tenmat’s line of fire-rated covers for recessed can lights, LED luminaries, and LED downlights, Tennessee Lighting Sales is expanding its portfolio into offering innovative fire protection solutions for lighting.

The line card will include Tenmat’s FF109-200 & FF109-250, FF109-300 & FF109-350, FF109-X, and FF130 – 2’x2’ & FF130 – 2’x4’.

Tenmat, a leading manufacturer of advanced passive fire protection products and materials is excited to partner with local lighting experts to further promote life safety and fire protection solutions.

For inquiries from Tennessee, please contact Tennessee Lighting Sales. If you are interested in becoming a distributor, please click here.

Discover More about Innovative Intumescent Technology in this month’s issue of Construction Specifier

June Edition of The Construction Specifier features a detailed article highlighting Tenmat’s cutting-edge intumescent materials and solutions.

The June edition of The Construction Specifier features a noteworthy piece focusing on the relevance of intumescent technology in the residential and commercial construction industry. The outline of this article features the definition of intumescent, the various solutions intumescent can be formed into, and the range of applications this technology applies to. Interested in exploring this cutting edge technology? Click Here to Read More.

Tenmat is Lighting Up the Dakotas!

Tenmat announces new partnership with JTH Lighting Alliance

Tenmat is delighted to announce our newest relationship with JTH Lighting Alliance in North Dakota and South Dakota.

JTH Lighting Alliance, located in North and South Dakota, is “a nationally respected lighting and lighting controls manufacturer’s representative committed to providing in-depth knowledge of new products, trends, and emerging technologies to all participants of our alliance”. JTH Lighting Alliance is expanding its portfolio into offering innovative fire protection solutions for lighting.

The line card will include Tenmat’s FF109-200 & FF109-250, FF109-300 & FF109-350, FF109-X, and FF130 – 2’ x 2’ & FF130 – 2’x4’. Tenmat, a leading manufacturer of advanced passive fire protection products and materials is excited to partner with local lighting experts to further promote life safety and fire protection solutions.

For inquires in North Dakota and South Dakota, please click here.

If you are interested in becoming a Tenmat partner, please click here.

Visit TENMAT at the ICC Building Safety & Design Expo

Join the TENMAT fire protection team at the International Code Council’s Building Safety & Design Expo in Las Vegas, NV from 20th – 21st October 2019.

The Building Safety & Design Expo is one of the world’s premier educational expos for building safety and design professionals and will be held this year at the RIO Hotel and Convention Center. The Expo is THE event, where building safety professionals, code enforcement officials and inspectors go to learn about the latest products and services needed to keep buildings safe and meet and maintain compliance with accepted codes and standards.

TENMAT as a leading manufacturer of fire protection products and materials is proud to join other professionals, such as local tradesmen, architects, engineers, and fire safety professionals from around the world to exchange critical information on the latest technologies for building a safer, more resilient world.

TENMAT will be exhibiting its full product portfolio consisting of fire rated enclosures for recessed lights, luminaires and troffers, cavity barriers for ventilated façade and cladding systems, joint seal protection, fire barriers and range of intumescent materials. A large proportion of TENMAT’s business is working with other passive fire protection manufacturers to design, develop and fire test products for them with TENMAT intumescent material as its functioning component.

Our innovative line of UL fire rated light covers for recessed lights and troffers are an easy to install and cost saving option to maintain the required fire resistance of the ceiling. TENMAT’s wide product variety gives electrical contractors, architects, and electrical engineers more freedom in fixture selection as the covers are suited to fit a wide range of recessed fixtures and fluorescent luminaires.

Please visit us at booth #202 to find out more. Materials samples, info packs and free give-aways will be waiting for all our visitors.

See you at booth #202!

Viva Las Vegas! Join TENMAT at the NFPA Expo

Meet the TENMAT fire protection team at the National Fire Protection Association (NFPA) Conference & Expo in Las Vegas, NV from 11th – 14th June 2018. 

As a leading manufacturer of passive fire protection products and solutions, TENMAT will be again exhibiting at the National Fire Protection Association (NFPA) Conference & Expo. This year’s premier event of the NFPA will be held at the Mandalay Bay Convention Center in Las Vegas, Nevada from 11th – 13th June 2018 and TENMAT can be found at booth #1663.

TENMAT will be exhibiting its full product portfolio consisting of fire rated enclosures for recessed lights, luminaires and troffers, cavity barriers for ventilated façade and cladding systems, joint seal protection, fire barriers and range of intumescent materials. A large proportion of TENMAT’s business is working with other passive fire protection manufacturers to design, develop and fire test products for them with TENMAT intumescent material as its functioning component.

Our innovative line of UL fire rated light covers for recessed lights and troffers are an easy to install and cost saving option to maintain the required fire resistance of the ceiling. TENMAT’s wide product variety gives electrical contractors, architects, and electrical engineers more freedom in fixture selection as the covers are suited to fit a wide range of recessed fixtures and fluorescent luminaires.

Please visit us at booth #1663 to find out more. Materials samples, info packs and free give-aways will be waiting for all our visitors.

See you at booth #1663!