Designed to Protect.

Discover how passive fire protection for LED downlights plays a key role in protecting our communities.

Where It Begins.

Energy efficiency, aesthetics, and increased life longevity are some of the key reasons why LED wafer downlights have been setting the lighting standards in modern construction practices. From constructing new Type V-A multifamily complexes to upgrading the current lighting system in a boutique hotel, LED downlights have the ability to offer easy installation for contractors, and the aesthetics for architects and developers – the ultimate combo. In addition to the previously mentioned applications, LED downlights can often be found in the following applications:

  • Commercial Spaces: Includes shopping malls, mixed-use buildings, local boutiques.
  • Residential Buildings: Includes multi-family complexes, student housing.
  • Hospitality Spaces: Includes hotels, motels, lodges, inns.

 

With its ability to be installed in renovation jobs and new construction projects, it is critical to ensure that our current and future communities are fully protected from life safety hazards, such as unprotected ceiling openings.

Look up at your ceiling. It’s important.

Frequently, unprotected ceiling openings are one of the most common life safety hazards found in modern construction applications. When a fire-rated ceiling assembly is penetrated by a recessed fixture, such as a LED wafer, the integrity of the ceiling is compromised. In the event of a fire outbreak, the recessed fixtures disintegrate after several minutes, allowing a clear pathway for smoke and flames to maneuver to the next level of an infrastructure.
As a result, the International Code Council has established a building code requirement to ensure that this life safety hazard is properly resolved within our communities. For reference, Section 714.5.2 of the 2021 IBC states:

“Where floor/ceiling assemblies are quired to have a fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced.”

In addition, it is essential to point out that LED wafers are being installed in both existing infrastructures and new construction. Therefore, it is critical to ensure that the unprotected ceiling openings are properly fire-rated, no matter if the infrastructure is previously existing or currently being built.

Exploring Your Options.

As the popularity of LED downlights reaches new heights in modern construction, it was critical that a proper fire-rated solution was developed. One of the recent trending solutions are “fire-rated” lights. These solutions are budget-friendly and offer quick, easy installation for on-site contractors. However, a huge misconception about these solutions is because they are composed of metal – they automatically have a fire-resistance rating for applications where fire-resistance rated assemblies are required. However, this is a false assumption. Even though metal itself offers some firestopping properties – it is a poor insulator and does not mean that a metal-based solution qualifies as a fire-rated solution. In order for any solution to claim they are fire-rated, it needs to be tested and approved by a third-party laboratory.

Another method of properly firestopping a LED “pancake” light is fire-rated drywall boxes. This firestopping method is where gypsum wallboards surround the LED wafers; however, there are several cons of this practice. Fire-rated drywall boxes are known to be associated with high labor savings, which can increase the cost of installation beyond budget limits. One of the main causes for high installation costs is this solution’s inability to be retrofitted into a pre-existing ceiling – meaning the pre-existing ceiling would need to be deconstructed prior to the installation of these solutions. In addition to its high labor costs, fire-rated boxes are not properly fire tested and certified – which defeats the purpose of installing proper passive fire protection measures.

Spec the Best, Specify Tenmat.

Now, all of the previously listed solutions don’t exactly check off all the boxes – so, the pressing question is “Are there any solutions that can check off all the preferred features of a firestopping solution?”. To answer your question, let us introduce you to – Tenmat’s FF109-200 and FF109-250, 1 Hour Fire Rated LED Downlight Covers. Composed with the latest intumescent technology, the FF109-200 and 250 are able to stop heat and flames from spreading to other parts of a building for up to 60 minutes. In addition, ALL of Tenmat’s Firestopping Solutions and Materials are tested through third-party laboratories, UL and Intertek and all certifications can be found on our website.. In addition to its firestopping components, the ultra-flexible nature of the intumescent material allows the cover(s) to get rolled up for easy retrofit, remodel, or new construction installations – ideal for a multitude of construction practices. To learn more about these optimal solutions, please visit the FF109-200 and FF109-350 product pages.

End Notes.

Incorporating passive fire protection measures is crucial for the safety of our communities, both in the present and future. LED downlight fixtures are very popular in modern-day construction, but without proper fire-rated solutions, they pose a great threat to our communities. By specifying solutions, such as Tenmat’s FF109-200 and 250, it is ensured that a building’s ceiling openings are protected – allowing for a fire-resistance rated ceiling’s integrity to be foolproof. If this article didn’t answer all of your questions and concerns, please feel free to contact one of our on-site specialists at +1-800-821-3435 or email us at info@tenmatusa.com.

Passive Fire Protection Solutions Designed for You.

Discover Which of Tenmat’s Pre-Designed Passive Fire Protection Solutions and Materials Fits Your Requirements.

Adaptability is key in the ever-evolving world of construction practices. From introducing the concepts of modular (off-site) construction to building extraordinary 8 story high-rises composed of cross-laminated timber, the demand for qualified life safety solutions has skyrocketed. Whether you are trying to reinforce the integrity of fire-resistance rated ceiling/floor assemblies or fire-rate through penetration applications, it is essential to find the proper solution to ensure flames and smoke can be contained in the event of a fire outbreak. At Tenmat, we are dedicated to providing the construction industry and our communities with solutions, composed with the latest in intumescent technology and designed to meet both standard and non-standard applications. To properly select your ideal solution, check out the breakdown of Tenmat’s full range of passive fire protection solutions below!

 

The Solutions that Set the Standards – Meet the FF109-300 and FF109-350.

With the commonality of recessed can lights in multi-family complexes, lecture halls, and shopping malls, it was essential for Tenmat to design a universal solution to reinforce the integrity of a fire-resistance rated ceiling/floor assembly. Designed to meet the dimensions of a majority of recessed can lights, the FF109-300 and 350 adapts to each lighting fixture – compartmentalizing the flames, heat, and smoke of a fire. With the lightweight and flexible composition of the cover, it has the capability to have a quick and easy installation – ideal for stringent lead times and significant labor savings. To learn more about Tenmat’s original fire-rated enclosures, please visit here.

Pushing the Boundaries of Life Safety – Experience Tenmat’s FF109-X.

In facilities with individuals in critical health, such as hospitals and senior living homes, the frame of evacuation is crucial in the event of a fire. In response, Tenmat has developed the FF109X – a two-hour fire rated light cover, designed to contain flames, heat, and smoke for up to two hours. With the ability to contain the growth of a fire for up to 120 minutes, it allows for lives and properties within these facilities to have a lengthened evacuation time, and response time for emergency teams to extinguish the fire. In addition to its prolonged containment period, the FF109X is composed of a flexible, lightweight intumescent material – allowing for hassle-free installation in high functioning environments. To discover more about Tenmat’s FF109x, please click here.

Retrofit for a Perfect Fit – Presenting the FF109-200 and FF109-250.

Trending Now: LED Downlights. As the usage of LED downlights in luxury, all-inclusive resorts, and mixed-use buildings rise, it was important to Tenmat to formulate the optimal fire-rated solution for LED downlights. Designed with state-of-the-art intumescent technology, the FF109-200 and 250 has the ability to fit over the LED downlight of your choice. With the flexible nature of the enclosure, the FF109-200 and 250 have the ability to be retrofitted easily around obstacles – optimal for a mess-free lighting renovation. Explore the additional key benefits of installing the FF109 200 and FF109-250 LED Downlight Covers in your latest renovations or new construction by visiting this link.

Fight the Flames, Protect the Sound Waves – Introducing the FF109-FRSC.

With the latest trend of installing in-ceiling loudspeakers in various construction applications, from in-home cinemas to outdoor shopping centers, the demand for a fire-rated solution to protect patrons and valuable property is climbing. Designed to contain the flames for 60 minutes, Tenmat would like to introduce its fire-rated in-ceiling loudspeaker cover, the FF109-FRSC. In addition to its firestopping capabilities, the sound absorbing properties of the intumescent material offers an enhancement in acoustical performance – producing a clearer and crisper sound. From its ability to be retrofitted into a pre-existing ceiling and its sound-absorbing properties, the FF109-FRSC is the optimal solution for both audiophiles and contractors. To explore further about this solution, please click this link.

Tested and Trusted Troffers: Meet the FF130 – 2’x2’ and FF130 – 2’x4’.

Troffer luminaries are a common lighting fixture in a multitude of applications, such as office buildings and educational facilities. As a result, Tenmat has formulated two inclusive solutions designed to fit the most common of luminaire fixtures, the FF130 – 2’x2’ and FF130 – 2’x4’. Formulated with retrofitting capabilities and designed for a hassle-free, mess-free installation, Tenmat’s Fire-Rated Troffer Covers are ideal for a quick school renovation or an approaching shopping mall grand opening. The FF130 – 2’x2’ and FF130 – 2’x4’ are the only available fully UL tested products on the market – ideal for life safety and building code requirements. Check out Tenmat’s FF130 – 2’x2’ and FF130 – 2’x4’ product page and delve deeper into how you can use these solutions in your next project: click here.

Fires in Façades: Introducing Tenmat’s FF102/50 Intumescent Fire Block.

As the adaptation of practicing energy conservation grows in the construction industry, the incorporation of exterior cavities has been steadily increasing. Even though this modern construction practice has a multitude of benefits, such as moisture dissipation and air ventilation, the void acts like an open chimney in the event of a fire – allowing for flames and smoke to spread at an accelerated rate. Due to this, Tenmat has developed the FF102/50, an intumescent fire block, designed to be installed in ventilated cladding and rainscreen systems. Unlike other available solutions, the FF102/50’s structure does not disrupt the added benefits of this application, which are air circulation, moisture dissipation, and energy conservation. Unlock the full potential of the FF102/50 by visiting this link.

“Plugging” Up the Flames: Meet Tenmat’s FF160 Fire Protection Plug.

From data storage centers to high school computer labs, the grid of cables and pipes is extensive in these densely packed technological facilities. With cables, wires, and pipes running through solid floors and ceilings – it is apparent that if these openings are not properly fire stopped, a fire outbreak will be catastrophic. With the understanding of the importance of electrical infrastructure, Tenmat has developed a rapidly expanding intumescent foam plug, the FF160. With its flexible and lightweight composition, the FF160 is able to be retrofitted, as well as new construction of power and control cables, telecommunication cables, and optical fiber cables. For more information about this UL listed solution, please visit here.

Fire“Blocking” At Its Finest: Presenting Tenmat’s FF260 Fire Protection Block.

Firestopping is essential to protecting the lives and property within our communities; therefore, firestopping all openings, no matter how small, is critical. Designed in a preformed, intumescent firestop block, the FF260 is ideal for sealing penetrations with cables, cable trays, cable bundles, metal pipes, and mixed penetrations. This solution caters to applications in high-functioning environments, such as healthcare facilities and K12 schools, by offering retrofitting installation capabilities and the ability to easily remove and re-install additional elements. Visit here to learn more about how you can implement this fire-rated through-penetration solution in your next assignment.

Defending All Pathways, No Matter How Small – Discover Tenmat’s FF360 Fire Protection Foam.

For facilities housing mass amounts of wires and cables, whether it being an elementary school, multi-family structure, or multi-use complex, it is imperative to incorporate life safety within these infrastructures. With cables and other through penetration applications, irregular, small openings are common; therefore, the importance of developing a firestopping solution to meet these demands is vital. Tenmat’s FF360 Fire Protection Foam is compatible with applications including blank openings, cable trays, metal pipes, conduits, wires and mixed penetrations in solid floors and ceilings. With its sag resistant, quick curing formulation and its expansion during installation, the FF360 has the ability to be installed at a quick, effortless pace – ideal for stringent lead times for renovations and new construction projects. Delve deeper into learning more about Tenmat’s FF360 Fire Protection Sealant by visiting this link.

“Sealing” the Future with Life Safety – Featuring Tenmat’s FF365 Fire Protection Sealant.

Struggling with fire-stopping an irregular, hard-to-access, or small opening? At Tenmat, we offer the optimal solutions for these nonstandard applications – the FF365 Fire Protection Sealant. Tenmat’s Fire Protection Sealant is a one-component, gun-grade intumescent firestop sealant designed to help properly fire rate small membrane penetrations in walls and ceilings for up to 120 minutes. Additionally, the FF365 can be used by itself or paired with other Tenmat products, such as the FF260 Fire Protection Blocks and the FF160 Fire Protection Plugs. To learn about the solution, who firestops the smallest membranes, click on this link.

 

 

 

Whether you are fire-rating a through-penetration opening, ventilated cavity, or LED downlight, Tenmat has formulated a pre-designed solution to meet stringent lead times and life safety requirements. If none of the previously mentioned solutions meet your application’s requirements, Tenmat possesses the manufacturing capabilities to work one-on-one to develop the optimal fire-rated solution with your application. If you are interested in working with our onsite R&D team or have any further questions about our pre-set products, please speak to one of our specialists at +1-800-821-3436, or email us at info@tenmatusa.com.

Beyond Books: A Lesson in Safety – Unveiling the Significance of Passive Fire Protection in Educational Environments.

Exploring the Vital Applications and Measures to Ensure Life Safety in K12 Schools, Colleges, and Universities is Met.

Fires in Focus: The Critical Demand for Passive Fire Protection in Educational Facilities

In the ever-expanding landscape of educational institutions, ensuring the safety of students, professors, administration, and additional staff is crucial. Whether you are renovating lighting fixtures in elementary schools or constructing a new dormitory for an expanding university campus, it is prominent to ensure passive fire protection measures are properly implemented to protect the lives and property within the “incubators” of our current and future generations.

Beyond the Flames: Demystifying Passive Fire Protection

Passive fire protection is a comprehensive defense strategy vital to securing educational structures from the devasting consequences of fire outbreaks. Unlike active fire protection systems that require human intervention, passive measures are inherently built into the architecture to automatically respond in the event of a fire. These measures include the incorporation of fire-resistant materials, specialized doors, and enclosures designed to contain and slow down flame and smoke progression. Therefore, passive fire protection acts as a proactive solution rather than reactive solutions – which caters to the critical element of time.

One of the primary and most profound significances of passive fire protection is its capacity to save lives. In the unfortunate event of a fire outbreak, these measures form a crucial barrier, impeding the progression of flames and smoke. This containment not only prevents the rapid escalation of the fire but also provides additional time for the execution of evacuation procedures. In educational settings, where the safety of students and staff is paramount, these vital moments can make a life-altering difference. In the chaotic atmosphere of a fire, every second counts, underscoring the imperative role that passive fire protection plays in enhancing the overall safety and resilience of educational environments.

Guardians of Learning: Identifying Key Areas for Passive Fire Protection

One of the primary contributors to the rapid expansion of a fire outbreak lies in unprotected ceiling openings, particularly those caused by recessed light fixtures in fire-resistance rated ceiling/floor assemblies. These openings create avenues for the swift dissemination of flames and smoke throughout the structure, posing a serious threat to the safety of its occupants. The implementation of passive fire protection solutions is crucial in mitigating this risk. A fire-rated enclosure, designed with materials like fire-rated drywall, mineral wool, or intumescent technology, acts as a safeguard by compartmentalizing the smoke and flames.

In addition to the vulnerability posed by unprotected ceiling openings from recessed light fixtures, in-ceiling loudspeakers also contribute to the rapid spread of fire outbreaks. Given the essential role of Public Address (PA) systems in large facilities like K12 schools and university learning centers, in-ceiling loudspeakers are prevalent in academic buildings. However, the integration of audio-visual (A/V) technology introduces additional pathways for flames, heat, and smoke to traverse. Therefore, it becomes imperative to install passive fire protection solutions in these applications to fortify the fire resilience of such structures.

Apart from the risk associated with unprotected ceiling openings from recessed lights and in-ceiling loudspeakers in fire-rated ceiling/floor assemblies, another concern arises from through-penetration openings caused by cables and wires. These openings create potential channels for the uncontrolled passenger of fire, compromising the integrity of firestopping barriers. To address this hazard, the installation of passive fire protection measures, including fire-rated plugs, blocks, foams, and sealants designed to stop flames and smoke, is becoming crucial. These solutions eliminate the smallest of pathways for flames and smoke, allowing for occupants to have a larger time frame to occupants.

In the Lab and Beyond: Cutting-Edge Technologies in Passive Fire Protection

As the demand for passive fire protection in educational settings rises, a multitude of passive fire protection solutions have entered the market. Some of these solutions include:

Fire-Rated Enclosures:

Passive fire protection solutions, such as fire-rated enclosures, are widely employed for safeguarding unprotected ceiling openings. While available in diverse sizes and compositions like mineral wool or intumescent material, a drawback lies in their limited adaptability. Many of these solutions lack the flexibility for easy installation, making them less accommodating for various lighting fixtures and in-ceiling loudspeakers, irrespective of model or manufacturer.

Fire-Rated Drywall Boxes:

Initially a cornerstone of passive fire protection, fire-rated drywall boxes face challenges due to labor-intensive installation processes and high associated costs. This traditional approach, while effective, is deemed less practical by many architects and contractors who seek more efficient and budget-friendly alternatives.

Fire-Rated Lights

Despite technological advancements, fire-rated lights have entered the passive fire protection market with some reservations. The intricacies in installation and maintenance present challenges for architects and contractors. Moreover, the limited aesthetic options of fire-rated lights may not align with the design preferences of new-construction educational facilities, potentially posing a drawback in their widespread adoption.

Intumscent Technology

Intumescent technology emerges as a versatile solution for fire-rating unprotected ceiling openings and through-penetration applications. With its adaptable, lightweight composition and added audio protection properties, intumescent technology stands out as a universal and efficient choice for a wide range of passive fire protection applications.

In addition to all of these available solutions is IMPORTANT to ensure they are fire tested and approved by a trusted third-party laboratory such as UL Solutions. To further learn about the importance of fire tested and approved passive fire protection solutions, please visit The Influence of Recessed Luminaires in Fire Resistive Assemblies | UL Solutions.

Smart Choices, Safer Spaces: Finding the All-In-One Passive Fire Protection Solution for Educational Facilities.

Here at Tenmat, our research and development team are dedicated to facing the opposing challenges of passive fire protection in education applications. All of our passive fire protection solutions are designed with the latest intumescent technology and have been fire tested by independent third-party labs such as UL and Intertek. Here are some of the key applications for educational facilities:

If Tenmat’s pre-designed solutions do not align with your application’s demands, we offer a full range of manufacturing capabilities – allowing for customizable intumescent solutions. Please reach out to one of Tenmat’s team members at +1-800-821-3436 for further assistance.

A Secure Future: Crafting a Blueprint for Passive Fire Protection in Education

In conclusion, the imperative demand for passive fire protection in educational facilities underscores the need for innovative solutions to ensure the safety of students, faculty, and infrastructure. The multifaceted challenges posed by unprotected ceiling openings, in-ceiling loudspeakers, and through-penetration openings necessitate comprehensive strategies for fire resilience. While various solutions exist in the market, Tenmat emerges as a standout provider, offering a range of fire-tested and approved products designed with cutting-edge intumescent technology. From fire-rated troffer covers to customizable intumescent solutions, Tenmat’s commitment to research and development reflects a dedication to meeting the evolving needs of educational environments, providing smart choices for creating safer spaces. For those navigating the critical landscape of passive fire protection, Tenmat stands as a reliable partner, offering a suite of solutions meticulously designed to address the unique challenges of educational structures.

Tenmat is Lighting Up the Dakotas!

Tenmat announces new partnership with JTH Lighting Alliance

Tenmat is delighted to announce our newest relationship with JTH Lighting Alliance in North Dakota and South Dakota.

JTH Lighting Alliance, located in North and South Dakota, is “a nationally respected lighting and lighting controls manufacturer’s representative committed to providing in-depth knowledge of new products, trends, and emerging technologies to all participants of our alliance”. JTH Lighting Alliance is expanding its portfolio into offering innovative fire protection solutions for lighting.

The line card will include Tenmat’s FF109-200 & FF109-250, FF109-300 & FF109-350, FF109-X, and FF130 – 2’ x 2’ & FF130 – 2’x4’. Tenmat, a leading manufacturer of advanced passive fire protection products and materials is excited to partner with local lighting experts to further promote life safety and fire protection solutions.

For inquires in North Dakota and South Dakota, please click here.

If you are interested in becoming a Tenmat partner, please click here.

Tenmat Has Landed in the Evergreen State!

Tenmat announces new partnership with J.C. Wright Lighting Sales, Inc.

Tenmat is delighted to announce our newest relationship with J.C. Wright Lighting Sales, Inc. J.C. Wright Lighting is “Eastern Washington and Northern Idaho’s Primer Lighting and Controls Manufacturer Representative.” J.C. Wright Lighting is located in Spokane, WA – for a full list of J.C. Wright Lighting territories, please click here.

The line card will include Tenmat’s FF109-200 & FF109-250, FF109-300 & FF109-350, FF109-X, and FF130 – 2’ x 2’ & FF130 – 2’x4’. Tenmat, a leading manufacturer of advanced passive fire protection products and materials is excited to partner with local lighting experts to further promote life safety and fire protection solutions.

For inquiries for Eastern Washington and Northern Idaho, please contact J.C. Wright Lighting Sales, Inc.

If you are interested in becoming a Tenmat partner, please contact us.

Don’t Take a Gamble on Passive Fire Protection

Tenmat will be exhibiting at the 2023 EduCode International Conference

The only thing you shouldn’t gamble in Las Vegas is life safety. This is the reason why Tenmat will be exhibiting our line of fire-rated covers for recessed light fixtures, LED downlights, and in-ceiling loudspeakers at the 2023 EduCode Conference.
If you are an inspector, plans examiner, permit technician, code enforcement officer, building official, architect, engineer, manager, leader, director or are otherwise working or interested in a safe built community, please stop by the Tenmat Booth from February 28 to March 1. The Expo is organized by the Southern Nevada Chapter of the International Code Council where building safety professionals, code enforcement officials and inspectors go to learn about the latest products and services needed to keep buildings safe and meet and maintain compliance with accepted codes and standards.

Tenmat will be exhibiting and answering all questions about our product portfolio consisting of fire rated enclosures for recessed lights, luminaires, in-ceiling loudspeakers, and troffers. A large proportion of Tenmat’s business is working with other passive fire protection manufacturers to design, develop and fire test products for them with Tenmat intumescent material as its functioning component.

Our innovative line of UL fire rated light covers for recessed lights, in-ceiling loudspeakers, and troffers are an easy to install and cost saving option to maintain the required fire resistance of the ceiling. Tenmat’s wide product variety gives electrical contractors, architects, and electrical engineers more freedom in fixture selection as the covers are suited to fit a wide range of recessed fixtures and fluorescent luminaires.

We are looking forward to meeting you at our booth! Not Attending? If you or your agency is interested in learning more about the Safety Hazard of Unprotected Ceiling Openings. Please click here to book your FREE webinar.

Life Safety is Getting Bigger in Texas!

Tenmat announces new partnership with Architectural Lighting Alliance (ALA)

Tenmat is delighted to announce our newest relationship with Architectural Lighting Alliance (ALA).

Architectural Lighting Alliance is “a full-service manufacturer’s representative currently representing the lighting industry’s top architectural and commodity lines.” ALA has three offices, located in Dallas, Shreveport, and Lubbock – for a full list of ALA’s territories, please click here.

The line card will include Tenmat’s FF109-200 & FF109-250, FF109-300 & FF109-350, FF109-X, and FF130 – 2’ x 2’ & FF130 – 2’x4’. Tenmat, a leading manufacturer of advanced passive fire protection products and materials is excited to partner with local lighting experts to further promote life safety and fire protection solutions.

For inquires in Northern Texas, please click here.

If you are interested in becoming a Tenmat partner, please click here.

Tenmat is Going West

Tenmat announces new partnership with Arizona Lighting Sales

Tenmat is thrilled to announce our partnership with Arizona Lighting Sales in Arizona.

Arizona Lighting Sales, located in Phoenix and Tempe, is “your source for illumination & the technology to control it” in Arizona. With the addition of Tenmat’s line of fire-rated covers for recessed can lights, LED luminaries, and LED downlights, Arizona Lighting Sales is expanding its portfolio into offering innovative fire protection solutions for lighting.

The line card will include Tenmat’s FF109-200 & FF109-250, FF109-300 & FF109-350, FF109-X, and FF130 – 2’x2’ & FF130 – 2’x4’.
Tenmat, a leading manufacturer of advanced passive fire protection products and materials is excited to partner with local lighting experts to further promote life safety and fire protection solutions.

For inquiries from Arizona, please contact Arizona Lighting Sales.

If you are interested in becoming a Tenmat partner, please contact us.

TENMAT Fire Rated LED Downlight Covers win Top Product Award

Electrical Products & Solutions Magazine selects TENMAT Fire Rated LED Downlight Covers as Top Product

The US trade publication Electrical Products & Solutions (EPS) has named TENMAT 1 Hour Fire Rated LED Downlight Covers one of the Top Products for electrical contractors in 2020.

EPS recognizes that the new TENMAT light covers are the most versatile solution to safely fire protect in-ceiling low-profile LED light fixtures and prevent flame spread in case of a fire.

Low-profile and wafer style LED lights are becoming increasingly popular in both retrofit and new construction applications as they consume less electricity and burn much cooler than incandescent lights. However since these lights still penetrate the fire resistance-rated ceiling, the building code requires them to be enclosed with a solution that will maintain the fire resistance rating of the ceiling assembly.

TENMAT covers were specifically designed to meet this building code requirement and provide a 1 hour fire resistance rating for your LED light fixture.

In addition, the unique design gives the architect, developer and electrical contractor more freedom in light and trim selection as the covers are suited to fit a wide range of light sizes, types and brands.

The flexible and lightweight nature of the covers makes installation quick and easy to provide a fire rated LED light, decreases the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions, making it the ideal solution for electrical contractors.

The high expansion and insulating properties of the cover ensure that both, flame spread and heat transmission, are stopped for 60 minutes (FF109-200 and/or FF109-250).

For our full line of fire rated LED light enclosures, please visit www.tenmatusa.com/fire-rated-light-enclosures

TENMAT introduces new 1 Hour Fire Rated LED Downlight Cover

FF109 Fire Rated LED Light Cover

TENMAT is excited to introduce the FF109 Fire Rated LED Downlight Covers, the only flexible 1 hour fire barrier for low profile recessed light fixtures on the market. The TENMAT FF109  Fire Rated LED Downlight Covers are cone-shaped intumescent enclosures which have been specifically designed to help maintain the integrity of openings of up to 6” diameter in fire rated ceilings when penetrated by modern low profile LED downlight fixtures.

The ultra-flexible nature of the material allows the cover to get rolled up for easy retrofit, remodel or new construction installation from below the ceiling to protect modern low profile LED light fixture and provide a 60 minute flame, smoke and heat barrier.

The FF109 Low-Profile LED Recessed Light Covers are suitable for most low profile LED lights, ultra-thin wafer LED recessed lights, LED recessed retrofit downlights, LED recessed ceiling light and recessed spotlight remodel kits installed in fire-resistance rated floor/ceiling or roof/ceiling assemblies (attic spaces).

The unique design gives the architect, specifier and installer more freedom in fixture selection as the covers are suited to a wide range of LED models and types.

Benefits of TENMAT’s Fire Rated LED Downlight Protection Covers include:

• 1 Hour Fire Tested
• Only fire tested solution for retrofit applications
• Easy Installation – can be fitted in seconds – no screws, drilling or additional sealant required
• Ultra flexible (Ideal for remodel and retrofit applications)
• Fits most 4” and 6” low profile LED downlight fixtures
• Significant Labor savings
• Lightweight
• Flexible material enables the cover to be fitted around obstructions or retro-fitted
• Vent hole on top of the cover reduces the risk of over-heating of the light in normal use
• In a fire, the intumescent material expands 5 times of its original thickness, closing the vent hole and preventing flame spread
• Easy to remove and re-install for light fixture maintenance
• Enhances the acoustic protection of the ceiling
• Maintenance free
• 60-minute fire protection

The cones come ready-to-use and can be fitted with little or no skills and without special tools. Once in place the covers do not require any additional maintenance and are unaffected by moisture.

TENMAT Recessed Light Covers are used in thousands of applications throughout the entire United States and Canada; from small apartments, over single-family homes to multifamily dwellings, college dormitories, hospitals, assisted-living facilities, hotels and office buildings.

For more information about  TENMAT’s new 1 Hour Fire Rated LED Downlight Covers, please visit https://www.tenmatusa.com/fire-rated-light-enclosures/ff109-250-1-hour-fire-rated-led-downlight-cover/